lash point on petroleum products having a flash point between -18°C and 71°C (kerosene and solvents). Suitable for flash point detection on different substances and waste materials, solvents…

Pensky Martens

ASTM D93 procedures A, B, C
DIN EN 22719
IP 34
ISO 2719

Subject
Flash Point on petroleum products, gas oils, fuel oils, lubrificants, biodiesel. Suitable for flash point detection on different substances, waste materials, solvents…

Measuring Abel Principle

The sample is warmed up according to the methods. When the sample reaches the selected test temperature, the shutter is opened and the ignition system introduces itself automatically. If the flash point is reached, the detection is done by an ionisation detector. If not, the shutter closes again and the sample continues to warm up until the next test temperature.

Measuring Pensky Martens Principle

The sample is heated and stirred at specified rates, using one of three defined procedures (A, B, or C). An ignition source is directed into the test cup at regular intervals with simultaneous interruption of the stirring, until a flash is detected.

Measuring Abel Devices

• Measurement of the Flash Point detected by an ionisation detector
• Testing unit equipped with two ignition systems
• Electrical system or flame exposure device

Measuring Pensky Devices

• Sample temperature: PT100 sensor completely made in stainless steel resistant to corrosion and shock resistant
• Bath temperature: PT100 sensor