The apparatus consists of a floor mounted water bath with a support for three vapor pressure cylinders.
- Enamel finished steel case.
- Stainless steel water bath suitable for the immersion of three vessels. Drain cock on the rear of the apparatus.
- Electric stirrer.
- Stainless steel heater.
- Microprocessor thermoregulator with built-in digital display 0.1°C accuracy. The probe is a PT100 RTD. Regulation accuracy ± 0.1°C. Working range: from ambient to 80°C.
- Safety device that cuts off the power supply and lights a lamp on the control panel in case of overheating of the liquid in the bath or lowering of the water level.
- Easy access control box placed on the right side of the apparatus containing all the electronics: anodized aluminum control panel with English written indications.
- English written user manual.
- For 220 V/50 Hz connections. Power consumption: 1000 W. - Dimensions (l x w x h ): mm 500 x 300 x 850 approx. Weight 50 kg approx.
- CE marked.
Ordering Information:
Apparatus:
Part#:
AD1267-100
ACCESSORIES:
Part#:
- AD1267-A00: LPG vapor pressure cylinder
- AD1267-A01: 33 1/3% lower chamber
- AD1267-A02: Pressure gage Bourdon type spring gage Ø 114 mm, range 0/100 psi
- AD1267-A03: As above, range 0/300 psi
- AD1267-A04: As above, range 0/600 psi CAL001 PT100 simulator
- CAL003: Official Certificate for Pt100 simulator
CONSUMABLES:
Part#:
- AD1267-C00: Gasket (to connect air chamber to pressure gage).Pack of 10
- AD1267-C01: Gasket (to connect upper chamber to straight through valve). Pack of 20
- AD1267-C02: Gasket (to connect lower chamber to straight through valve). Pack of 20
- TA018C-N00: ASTM 18C thermometer (+34/+42°C)
- TA065C-N00: ASTM 65C thermometer (+50/+80°C)